- Home
- › Products
- › Cryogenic
- › Safety Valves
CRYOGENIC
Type 06440
Cryogenic Safety Valves, angle type, stainless steel, PN40 d0=7.0 & 10.5mm up to PN50 type tested TÜV-SV.1111. S/G Standard safety valve, with PCTFE valve seal, (except d07, which is metal to metal seated only: in this case the Part No. changes from 06440.X.X000 to 06440.070X.X100 ), closed bonnet "cleaned and degreased for oxygen service" Part No. 06440.X.0000 Inlet: male thread type G (BSPP) acc. to ISO 228/1, Outlet: female thread type G (BSPP) acc. to ISO 228/1 Part No. 06440.X.2000 Inlet: male thread type R (BSPT) acc. to ISO 7/1, Outlet: female thread type G (BSPP) acc. to ISO 228/1 Part No. 06440.X.5000 Inlet: male thread NPT acc. to ANSI B 1.20.1, Outlet: female thread type G (BSPP) acc. to ISO 228/1 Part No. 06440.X.6000 Inlet: male thread NPT acc. to ANSI B 1.20.1, Outlet: female thread NPT acc. to ANSI B 1.20.1 Applications: Provided as safety device for protection against excessive pressure in stationary and moveable gas cylinders and pressure vessels. Approved for air gases, vapours and cryogenic liquefied gases incl. LNG. Working temperature: -196°C / -321°F (77K) up to +185°C / +365°F (458K), with PCTFE-seal up to +150°C / 302°F (423K), suitable for horizontal installation |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Type 06440 | Technical data | |||||||||
Nominal size | GW | 1/2 | 3/4 | 1/2 | 3/4 | 3/4 | 1 | 1 | 1-1/4 | 1-1/4 |
Orifice | d0 | 7.0 | 7.0 | 10.5 | 10.5 | 14.0 | 14.0 | 18.0 | 18.0 | 23.0 |
Dimension code | .X. | 0704 | 0706 | 1004 | 1006 | 1406 | 1410 | 1810 | 1812 | 2312 |
Set pressure range | bar | 0.4-50.0 | 0.4-50.0 | 0.4-50.0 | 0.4-50.0 | 0.4-40.0 | 0.4-40.0 | 0.4-40.0 | 0.4-40.0 | 0.4-10.0 |
Outlet | GA | 1 | 1 | 1 | 1 | 1-1/4 | 1-1/4 | 1-1/2 | 1-1/2 | 1-1/2 |
Height | H | 140 | 140 | 140 | 140 | 159 | 159 | 186 | 187 | 187 |
Length | A1 | 14 | 16 | 14 | 16 | 16 | 18 | 18 | 20 | 20 |
Length | L1 | 36 | 36 | 36 | 36 | 50 | 50 | 48 | 48 | 48 |
Length | L2 | 36.5 | 36.5 | 36.5 | 34.5 | 44 | 44 | 50.5 | 51.5 | 52 |
Wrench size across flats | S1 | 30 | 30 | 30 | 30 | 41 | 41 | 50 | 50 | 50 |
Wrench size across flats | S2 | 41 | 41 | 41 | 41 | 50 | 50 | 58 | 58 | 58 |
Weight | ca. kg | 0.78 | 0.80 | 0.76 | 0.79 | 1.25 | 1.31 | 1.87 | 1.99 | 1.90 |
Coeff. of disch. from 3.0 bar | αw | 0.78 | 0.78 | 0.69 | 0.69 | 0.66 | 0.66 | 0.66 | 0.66 | 0.54 |
Dimensions in mm. |
Discharge capacities Medium: Air in m³/h at 0°C and 1013.25 mbar Air in SCFM at 60°F (15.6°C) and 14.7 psia (1013.25 mbar) The capacity indicated below is for a fully opened valve. d0 - orifice A0 - flow area |
Calculation of discharge capacity acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1 resp. ASME Code Sec. VIII.
|
Set pressure in bar (ü) | GW | 1/2 & 3/4 | 1/2 & 3/4 | 3/4 & 1 | 1 & 1-1/4 | 1-1/4 |
d0 (mm) | 7.0 | 10.5 | 14.0 | 18.0 | 23.0 | |
A0 (mm²) | 38.48 | 86.59 | 153.94 | 254.47 | 415.48 | |
Medium | Air in m³/h | |||||
0.4 | 24 | 43 | 77 | 123 | 157 | |
0.5 | 27 | 49 | 87 | 141 | 179 | |
1.0 | 41 | 77 | 131 | 216 | 287 | |
1.5 | 54 | 101 | 179 | 291 | 376 | |
2.0 | 66 | 126 | 219 | 362 | 473 | |
3.0 | 88 | 176 | 299 | 495 | 661 | |
4.0 | 111 | 221 | 375 | 621 | 829 | |
5.0 | 134 | 266 | 453 | 748 | 1000 | |
6.0 | 156 | 311 | 529 | 875 | 1169 | |
7.0 | 179 | 356 | 606 | 1001 | 1337 | |
8.0 | 202 | 402 | 684 | 1131 | 1511 | |
9.0 | 225 | 447 | 761 | 1258 | 1680 | |
10.0 | 248 | 494 | 839 | 1387 | 1853 | |
12.0 | 293 | 584 | 993 | 1641 | - | |
14.0 | 339 | 674 | 1147 | 1895 | - | |
16.0 | 384 | 765 | 1300 | 2149 | - | |
18.0 | 430 | 855 | 1454 | 2403 | - | |
20.0 | 480 | 954 | 1623 | 2683 | - | |
22.0 | 525 | 1046 | 1778 | 2939 | - | |
24.0 | 571 | 1137 | 1933 | 3196 | - | |
26.0 | 617 | 1228 | 2088 | 3452 | - | |
28.0 | 663 | 1319 | 2244 | 3709 | - | |
30.0 | 715 | 1424 | 2421 | 4003 | - | |
32.0 | 762 | 1516 | 2578 | 4262 | - | |
34.0 | 808 | 1608 | 2735 | 4520 | - | |
36.0 | 854 | 1700 | 2891 | 4779 | - | |
38.0 | 900 | 1792 | 3048 | 5038 | - | |
40.0 | 955 | 1901 | 3232 | 5343 | - | |
42.0 | 1002 | 1994 | - | - | - | |
44.0 | 1048 | 2086 | - | - | - | |
46.0 | 1095 | 2179 | - | - | - | |
48.0 | 1142 | 2272 | - | - | - | |
50.0 | 1198 | 2385 | - | - | - |
Set pressure in psig | GW | 1/2 & 3/4 | 1/2 & 3/4 | 3/4 & 1 | 1 & 1-1/4 | 1-1/4 |
d0 (inch) | 0.276 | 0.413 | 0.551 | 0.709 | 0.906 | |
A0 (in²) | 0.060 | 0.134 | 0.239 | 0.394 | 0.644 | |
Medium | Air in SCFM | |||||
15 | - | - | 92 | - | - | |
28 | - | - | 129 | - | 298 | |
29 | 42 | - | - | - | 304 | |
35 | 47 | 90 | 154 | - | 346 | |
40 | 52 | 100 | 169 | 280 | 382 | |
50 | 62 | 118 | 201 | 333 | 454 | |
60 | 72 | 137 | 233 | 385 | 525 | |
70 | 82 | 156 | 265 | 438 | 597 | |
80 | 92 | 174 | 296 | 490 | 669 | |
90 | 101 | 193 | 328 | 543 | 740 | |
100 | 111 | 212 | 360 | 595 | 812 | |
120 | 131 | 249 | 424 | 700 | 955 | |
145 | 155 | 296 | 503 | 831 | 1134 | |
160 | 170 | 324 | 551 | 910 | - | |
180 | 190 | 361 | 614 | 1015 | - | |
220 | 229 | 436 | 741 | 1225 | - | |
240 | 249 | 473 | 805 | 1330 | - | |
250 | 258 | 492 | 836 | 1383 | - | |
260 | 268 | 511 | 868 | 1435 | - | |
280 | 288 | 548 | 932 | 1540 | - | |
300 | 307 | 585 | 995 | 1645 | - | |
325 | 332 | 632 | 1075 | 1777 | - | |
350 | 357 | 679 | 1154 | 1908 | - | |
375 | 381 | 725 | 1233 | 2039 | - | |
400 | 406 | 772 | 1313 | 2170 | - | |
425 | 430 | 819 | 1392 | 2302 | - | |
450 | 455 | 865 | 1472 | 2433 | - | |
475 | 479 | 912 | 1551 | 2564 | - | |
500 | 504 | 959 | 1630 | 2695 | - | |
525 | 528 | 1006 | 1710 | 2827 | - | |
550 | 553 | 1052 | 1789 | 2958 | - | |
575 | 577 | 1099 | 1868 | 3089 | - | |
600 | 602 | 1146 | - | - | - | |
625 | 626 | 1192 | - | - | - | |
650 | 651 | 1239 | - | - | - | |
675 | 675 | 1286 | - | - | - | |
700 | 700 | 1332 | - | - | - | |
725 | 724 | 1379 | - | - | - |