Type 11C01 - Globe Valve FullX

CRYOGENIC

Type 11C01 - Globe Valve FullX with actuator

Top-Entry pneumatic actuated Cryogenic-Globe Valves, forged steel body, up to PN63

A009 series

Stainless steel body and topwork,
actuator - spring to close, air to open
"live loaded" gland packing
"cleaned and degreased for oxygen service"
- the actuator is not cleaned and degreased für oyxgen

Butt weld connection for stainless steel pipes acc. to ISO 1127 oder ASTM A312
Available accessories/options:

- Solenoid valve - Limit switch - Electropneumatic positioner etc.
- Actuator - cleaned and degreased for oxygen service
- Bellow, top position
- Bellow monitoring
- Check function
- Control function
- Throttle function
- Purge port

- On request only:
- Further connection types

Applications:
Approved for hydrogen, air gases, vapours and cryogenic liquefied gases incl. LNG.
Working temperature: -269°C / -452°F (4K) up to +80°C / +176°F (353K)

Type 11C01 - Globe Valve FullX with actuator

Materials		DIN EN	ASTM
1	Body	1.4571	A 313 Grade 316TI
2	Valve seal	PCTFE
3	Disc	1.4571	A 313 Grade 316TI
4	Tube	1.4571	A 313 Grade 316TI
5	Hollow stem	1.4571	A 313 Grade 316TI
6	Flange	1.4404	A 276 Grade 316L
7	Bonnet gasket	PTFE / Elektrocarbon (25%)
8	Bushing	CW452K	B 159 UNS C51900
9	Bolt	A4-70	A 194 B8M
10	Head peace	1.4404	A 276 Grade 316L
11	Sliding bushing	CW452K	B 159 UNS C51900
12	Gasket	PTFE / Elektrocarbon (25%)
13	Gland bolt	1.4404	A 276 Grade 316L
14	Wiper	PEEK	B 159 UNS C51900
15	Stem	1.4404	A 276 Grade 316L
16	O-ring	FPM (VITON)
17	Bracket	1.4404	A 276 Grade 316L

Nominal size	DN	10	15	20	25	32	40	50
Collar-Ø	G	68.0	68.0	68.0	68.0	84.4	84.4	100
Length	M	5	5	5	5	5	5	5
Actuator-Ø	B	dependent on actuator
Outside pipe-Ø ISO	Ra	17.2	21.3	26.9	33.7	42.4	48.3	60.3
Wall thickness pipe ISO	a	1.8	2.0	2.3	2.6	2.6	2.6	2.9
Pipe-Ø ASTM A312		S10

Dimensions in mm.

Body types

Straight body

Nominal size	DN	10	15	20	25	32	40	50
Face-to-face dim.	FF	150	150	195	195	235	235	280
Height	H	567	567	567	567	dependent on actuator
Length	E	325	325	325	325	445	445	525
Kvs-value	m³/h	3.4	4.4	9.8	12.3	25.8	28.3	44.0
Kvs-value*	m³/h	3.4	4.4	9.5	12.0	25.8	28.3	44.0
Cv-value	gal/min	4.0	5.1	11.4	14.3	30.0	32.9	51.2
Cv-value*	gal/min	4.0	5.1	11.0	14.0	30.0	32.9	51.2
Weight**	ca. kg	4.95	4.97	5.72	5.77	11.50	11.53	15.33

* with bellow, ** without actuator

Body angle type

Nominal size	DN	10	15	20	25	32	40	50
Face-to-face dim.	FF	80	80	100	100	120	120	140
Height	H	567	567	567	567	dependent on actuator
Length	E	325	325	325	325	445	445	525
Length	L	80	80	100	100	120	120	140
Kvs-value	m³/h	4.7	5.7	19.8	22.3	41.1	43.6	80.0
Kvs-value*	m³/h	4.7	5.7	16.5	19.0	33.3	35.8	63.0
Cv-value	gal/min	5.5	6.6	23.0	25.9	47.8	50.7	93.0
Cv-value*	gal/min	5.5	6.6	19.2	22.1	38.7	41.6	73.3
Weight**	ca. kg	4.91	4.93	5.64	5.68	11.11	11.14	14.53

* with bellow, ** without actuator

Body Y type

Nominal size	DN	10	15	20	25	32	40	50
Face-to-face dim.	FF	185	185	250	250	285	285	340
Height	H	521	521	524	524	dependent on actuator
Length	E	365	365	370	370	505	505	600
Kvs-value	m³/h	4.2	5.2	11.9	14.4	34.4	36.9	69.8
Kvs-value*	m³/h	4.2	5.2	7.7	10.2	28.6	31.1	35.0
Cv-value	gal/min	4.9	6.0	13.8	16.7	40.0	42.9	81.2
Cv-value*	gal/min	4.9	6.0	9.0	11.9	33.3	36.2	40.7
Weight**	ca. kg	5.24	5.26	6.37	6.42	12.53	12.56	17.50

* with bellow, ** without actuator

Top-Entry pneumatic actuated Cryogenic-Globe Valves, casted body, up to PN50

A010 series

Stainless steel body and topwork,
actuator - spring to close, air to open
"live loaded" gland packing
"cleaned and degreased for oxygen service"
- the actuator is not cleaned and degreased für oyxgen

Butt weld connection for stainless steel pipes acc. to ISO 1127 oder ASTM A312
Available accessories/options:

Materials		DIN EN	ASTM
1	Body	1.4409	A 351 CF3M
2	Valve seal	PCTFE
3	Disc	1.4571	A 313 Grade 316TI
4	Tube	1.4571	A 313 Grade 316TI
5	Hollow stem	1.4571	A 313 Grade 316TI
6	Flange	1.4404	A 276 Grade 316L
7	Bonnet gasket	PTFE / Elektrocarbon (25%)
8	Bushing	CW452K	B 159 UNS C51900
9	Bolt	A4-70	A 194 B8M
10	Head piece	1.4404	A 276 Grade 316L
11	Sliding bushing	CW452K	B 159 UNS C51900
12	Gasket	PTFE / Elektrocarbon (25%)
13	Gland bolt	1.4404	A 276 Grade 316L
14	Wiper	PEEK	B 159 UNS C51900
15	Stem	1.4404	A 276 Grade 316L
16	O-ring	FPM (VITON)
17	Bracket	1.4404	A 276 Grade 316L

Nominal size	DN	10	15	20	25	32	40	50
Collar-Ø	G	68.0	68.0	68.0	68.0	84.4	84.4	100
Length	M	5	5	5	5	5	5	5
Actuator-Ø	B	dependent on actuator
Outside pipe-Ø ISO	Ra	13.5	21.3	26.9	33.7	42.4	48.3	60.3
Wall thickness pipe ISO	a	1.6	2.0	2.0	2.6	2.6	2.6	2.6
Pipe-Ø ASTM A312		S10

Dimensions in mm.

Body types

Straight body

Nominal size	DN	10	15	20	25	32	40	50
Face-to-face dim.	FF	85	85	115	115	130	130	155
Height	H	647	647	647	647	dependent on actuator
Length	E	325	325	325	325	445	445	525
Kvs-value	m³/h	2.4	3.8	10.0	13.3	16.0	25.0	46.0
Kvs-value*	m³/h	3.4	4.4	9.5	12.0	25.8	28.3	44.0
Cv-value	gal/min	2.8	4.4	11.6	15.4	18.5	28.9	53.2
Cv-value*	gal/min	4.0	5.1	11.0	14.0	30.0	32.9	51.2
Weight**	ca. kg	4.93	4.94	5.62	5.65	11.42	11.38	14.82

* with bellow, ** without actuator

Flow coefficient for Control Valves - Control characteristic equal percentage Kvs-Value in m³/h,

Cv-Value in gal/min. These figures refer to measurements for the flow direction.

Type 11C01 with actuator and control function - A001 and A002 series

DN	Kvs [m³/h]	Cv [gal/min]	Stroke [mm]
10	1.0	1.2	10
15	3.5	4.1	10
20	4.0	4.7	10
25	6.3	7.3	10
32	10.0	11.6	20
40	19.0	22.1	20
50	30.0	34.9	20

Configurable options

For configurable types, the HEROSE part number consists as follows:

Type	Series	Dimension code	Option codes
11C01.	A001.	0250.	CBQ-KCZ-XZE-LYV-CBG-DDP
1	2	3	4 up to 11

	Selection of the type		Type
1	Type	Product group
1	Type	Globe Valve FullX	11C01

	Selection of the series				Series
2	Series	forged steel body	PN63	manual (handwheel)	A001
		casted body	PN50	manual (handwheel)	A002
		forged steel body	PN63	actuated (diaphragm / piston)	A009
		casted body	PN50	actuated (diaphragm / piston)	A010

	Selection of the nominal size		Dimension code
3	Nominal sizes	DN10	0100
		DN15	0150
		DN20	0200
		DN25	0250
		DN32	0320
		DN40	0400
		DN50	0500

4	Body types	Body angle type	CBQ
		Straight body	HJC
		Body Y type	PYU

5	Disc function	lockable function	KCZ
		lockable check function	JDA
		lockable control function	SWX
		lockable throttle function	WVV

	Choose of connections
	Series A001 + A009
6	Connection	DIN/ ASTM	Nominals	Outer pipe-Ø	Wall thickness (a) [mm]	Connection type In / Out	Connection extension In / Out	Body type straight	Body type angle	Body type Y
		DIN	DN10	17.2	1.8	Butt weld	w/o	KSP	QXY	PKL
		DIN	DN15	21.3	2.0	Butt weld	w/o	MZE	CVP	FYB
		DIN	DN20	26.9	2.3	Butt weld	w/o	DPN	BNN	WHZ
		DIN	DN25	33.7	2.3	Butt weld	w/o	PKY	XZE	CXP
		DIN	DN32	42.4	2.6	Butt weld	w/o	GLU	ZKC	HHY
		DIN	DN40	48.3	2.6	Butt weld	w/o	RJE	WUW	JBM
		DIN	DN50	60.3	2.9	Butt weld	w/o	WPW	BGA	UXB
		ASTM	DN10	1/4''	S10	Butt weld	w/o	-	-	-
		ASTM	DN15	1/2''	S10	Butt weld	w/o	TPE	RDZ	GFG
		ASTM	DN20	3/4''	S10	Butt weld	w/o	-	-	-
		ASTM	DN25	1''	S10	Butt weld	w/o	XSG	QTU	UWU
		ASTM	DN32	1 1/4''	S10	Butt weld	w/o	WHA	LRP	JKY
		ASTM	DN40	1 1/2''	S10	Butt weld	w/o	VFZ	KMC	WLQ
		ASTM	DN50	2''	S10	Butt weld	w/o	-	-	-

	Choose of connections
	Series A002 + A010
6	Connection	DIN/ ASTM	Nominals	Outer pipe-Ø	Wall thickness (a) [mm]	Connection type In / Out	Connection extension In / Out	Body type straight	Body type angle	Body type Y
		DIN	DN10	13.5	1.6	Butt weld	w/o	FKR	-	-
		DIN	DN15	21.3	2.0	Butt weld	w/o	WQC	-	-
		DIN	DN20	26.9	2.0	Butt weld	w/o	SEE	-	-
		DIN	DN25	33.7	2.6	Butt weld	w/o	PKY	-	-
		DIN	DN32	42.4	2.6	Butt weld	w/o	GLU	-	-
		DIN	DN40	48.3	2.6	Butt weld	w/o	RJE	-	-
		DIN	DN50	60.3	2.6	Butt weld	w/o	JYS	-	-
		ASTM	DN10	1/4''	S10	Butt weld	w/o	MBS	-	-
		ASTM	DN15	1/2''	S10	Butt weld	w/o	FWH	-	-
		ASTM	DN20	3/4''	S10	Butt weld	w/o	LDK	-	-
		ASTM	DN25	1''	S10	Butt weld	w/o	XSG	-	-
		ASTM	DN32	1 1/4''	S10	Butt weld	w/o	WHA	-	-
		ASTM	DN40	1 1/2''	S10	Butt weld	w/o	VFZ	-	-
		ASTM	DN50	2''	S10	Butt weld	w/o	XVN	-	-

7	Vacuum jacketing	w/o Vacuum jacketing	DDP
		Vacuum jacketing with MLI (Multi Layer Insulation)	RVA
		Vacuum jacketing w/o MLI	MMA

	Choose of connection with vacuum jacketing
	Serie A001 + A009
8	Connection with extensions	DIN/ ASTM	Nominal size DN/outer pipe-Ø ASTM	Outer pipe-Ø DIN	Vacuum- jacketing-Ø DIN/ASTM	Connection type In-/Out	Connection extensions In-/Out	Body type straight	Body type angle	Body type Y
		DIN/ASTM	DN10 / 3/8'' S10	17.2 x 1.8	88.9 x 2 / 3''S5	Butt weld	Vacuum jacketing	WUJ	-	-
		DIN/ASTM	DN15 / 1/2'' S10	21.3 x 2	88.9 x 2 / 3''S5	Butt weld	Vacuum jacketing	NAH	-	-
		DIN/ASTM	DN20 / 3/4'' S10	26.9 x 2.3	114.3 x 2 / 4''S5	Butt weld	Vacuum jacketing	AFX	-	-
		DIN/ASTM	DN25 / 1'' S10	33.7 x 2.6	114.3 x 2 / 4''S5	Butt weld	Vacuum jacketing	ZGJ	-	-
		DIN/ASTM	DN32 / 1 1/4'' S10	42.4 x 2.6	-/5''S5	Butt weld	Vacuum jacketing	LBC	-	-
		DIN/ASTM	DN40 / 1 1/2'' S10	48.3 x 2.6	-/5''S5	Butt weld	Vacuum jacketing	UDG	-	-
		DIN/ASTM	DN50 / 2'' S10	60.3 x 2.6	168.3 x 2/6 / 6''S5	Butt weld	Vacuum jacketing	LPA	-	-

	Choose of connection with vacuum jacketing
	Serie A002 + A010
8	Connection with extensions	DIN/ ASTM	Nominal size DN/outer pipe-Ø ASTM	Outer pipe-Ø DIN	Vacuum- jacketing-Ø DIN/ASTM	Connection type In-/Out	Connection extensions In-/Out	Body type straight	Body type angle	Body type Y
		DIN/ASTM	DN10 / 1/4'' S10	13.5 x 1.6	88.9 x 2 / 3''S5	Butt weld	Vacuum jacketing	HQS	-	-
		DIN/ASTM	DN15 / 1/2'' S10	21.3 x 2	88.9 x 2 / 3''S5	Butt weld	Vacuum jacketing	JGG	-	-
		DIN/ASTM	DN20 / 3/4'' S10	26.9 x 2.3	114.3 x 2 /4 ''S5	Butt weld	Vacuum jacketing	BXD	-	-
		DIN/ASTM	DN25 / 1'' S10	33.7 x 2.6	11.3 x 2 / 4''S5	Butt weld	Vacuum jacketing	HUX	-	-
		DIN/ASTM	DN32 / 1 1/4'' S10	42.4 x 2.6	-/5''S5	Butt weld	Vacuum jacketing	EGQ	-	-
		DIN/ASTM	DN40 / 1 1/2'' S10	48.3 x 2.6	-/5''S5	Butt weld	Vacuum jacketing	AHS	-	-
		DIN/ASTM	DN50 / 2'' S10	60.3 x 2.6	168.3 x 2.6 / 6''S6	Butt weld	Vacuum jacketing	WQT	-	-

		Bellow	Bellow position	Bellow monitoring	Dimension bellow monitoring
9	Bellow options	not selected	not selected	not selected	not selected	LYV
		selected	top	not selected	not selected	MUR
		selected	top	selected	DIN EN ISO 8434-1-WDS-S6	GXD

10	Purge port	w/o purge port	CBG
		with NPT 1/8'' (female)	EPH
		with VCR 1/4'' (male)	ANK

11	Actuator selection	See data sheets for pneumatic actuators for type 11C01
11	Actuator selection

International

Contact

Cryogenic

Industry