INDUSTRY
Type 06C01
Safety Valves, brass (A001), type tested TÜV-SV.948 Liquid/ Granular/ Powder Standard safety valve with FPM valve seal, closed bonnet, with diaphragm for protection of the spring, with lifting device, discharge holes with protection cap Inlet: male thread type G (BSPP) acc. to ISO 228/1 Part No. 06C01.A001.X - Material brass Part No. 06C01.A002.X - Material stainless steel Available options: - short version (height 160 mm) d0 25 up to 3 bar made of stainless steel Applications: Provided as safety device for protection against excessive pressure in the gas phase in vehicle containers and pressure vessels. Approved for liquid, granular and powdery goods. Working temperature: -40°C / -40°F (233K) up to +200°C / +392°F (473K), suitable for horizontal installation (d0 25 up to d0 48) |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Type 06C01 | Technical data | ||||
Nominal size | GW | 1 | 1-1/4 | 1-1/2 | 2 |
Orifice | d0 | 25 | 31 | 31 | 48 |
Set pressure range | bar | 0.5-6.0 | 0.5-6.0 | 0.5-6.0 | 0.5-3.5 |
Height | H | 186 | 191 | 191 | 232 |
Length | L2 | 18 | 22 | 22 | 25 |
Protection cap diameter | D | 86 | 86 | 86 | 114 |
Wrench size across flats | S1 | 55 | 55 | 55 | 85 |
Weight | ca. kg | 1.65 | 1.58 | 1.58 | 4.6 |
Coeff. of discharge from 3.0 bar | αw | 0.68 | 0.68 | 0.68 | 0.55 |
Series A001: Material brass | x | x | x | x | |
Series A002: Material stainless steel | x | x | x | - |
Dimensions in mm. |
Discharge capacities Calculation of flow rate acc. to AD2000-Merkblatt A2 Medium: Air in m³/h at 0°C and 1013.25 mbar The capacity indicated below is for a fully opened valve. d0 - orifice A0 - flow area
|