- Home
- › Products
- › Cryogenic
- › Safety Valves
INDUSTRY
Type 06820
|
Safety Valves, angle type, stainless steel, type tested, TÜV-SV.1130. S/G/L Standard safety valve Metallic or PEEK seal, "cleaned and degreased for oxygen service" closed bonnet, gastight cap Inlet / Outlet: male / female thread type G (BSPP) acc. to ISO 228/1 Pmax 550.0 bar (S/G/L): metallic seal, max. Temp. -270°C (3K) up to +400°C (673K) Part No. 06820.X.000000M Part No. 06820.X.000000H (Pmax 550.0 bar) stellited version Pmax 1200.0 bar (S/G): PEEK seal, max. Temp. -60°C (213K) up to +85°C (358K) Part No. 06820.X.000001W Part No. 06820.0423.503001W with inlet 13/16''-16 UN Available options - on request only: - Flange- or NPT- connection for in- and outlet - Inlet: Cone & thread connection for d0 6mm - 9M 13/16''-16 UN or 12M 3/4'' - 14NPS - Special materials such as Duplex for medium wetted parts. Applications: Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels. Approved for gases, vapours and liquids. Working temperature: -270°C / -454°F (3K) up to +400°C / +752°F (673K) Pressure-temperature must be observed, suitable for horizontal installation up to 300 bar |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type 06820 | Technical data | |||||
| Nominal size | GW | 1/2 | 3/4 | 1/2 | 3/4 | 13/16'' - 16 UN |
| Orifice | d0 | 6.0 | 6.0 | 4.0 | 4.0 | 4.0 |
| Dimension code | .X. | 0623 | 0633 | 0423 | 0433 | 0423 |
| Set pressure range | bar | 30-400 | 30-550 | 260-400 | 260-1200 | 260-1200 |
| Outlet | GA | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 |
| Height | H1 | 247 | 247 | 247 | 247 | 247 |
| Length | L1 | 45 | 45 | 45 | 45 | 45 |
| Length | L2 | 29 | 29 | 29 | 29 | 29 |
| Length | A1 | 16 | 16 | 16 | 16 | 16 |
| Weight 06820 | ca. kg | 2.9 | 2.9 | 2.9 | 2.9 | 2.9 |
| Coeff. of discharge gases, vapours | αw | 0.52 | 0.52 | 0.66 | 0.66 | 0.66 |
| Coeff. of discharge fluids | αw | 0.42 | 0.42 | - | - | - |
| Dimensions in mm. |
|
Discharge capacities Calculation of flow rate acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1 Medium: A = Saturated steam in kg/h B = Air in m³/h at 0°C and 1013,25 mbar C = Water in kg/h at 20°C D = Flow Hydrogen in kg/h at 20°C E = Flow Hydrogen in kg/h at 20°C The capacity indicated below is for a fully opened valve. d0 - orifice A0 - flow area |
| Set pressure in bar (ü) | GW | 3/4 | ||
| d0 (mm) | 6.0 | |||
| A0 (mm²) | 28.27 | |||
| Medium | A | B | C | |
| 30.0 | 254 | 350 | 3473 | |
| 40.0 | 336 | 468 | 4011 | |
| 60.0 | 503 | 708 | 4912 | |
| 80.0 | 670 | 953 | 5672 | |
| 100.0 | 845 | 1203 | 6341 | |
| 120.0 | 1032 | 1451 | 6947 | |
| 140.0 | 1230 | 1703 | 7503 | |
| 160.0 | 1437 | 1952 | 8021 | |
| 180.0 | 1688 | 2194 | 8508 | |
| 200.0 | 2215 | 2429 | 8968 | |
| 220.0 | - | 2659 | 9406 | |
| 240.0 | - | 2893 | 9824 | |
| 260.0 | - | 3133 | 10225 | |
| 280.0 | - | 3374 | 10611 | |
| 300.0 | - | 3614 | 10983 | |
| 320.0 | - | 3854 | 11344 | |
| 340.0 | - | 4094 | 11693 | |
| 360.0 | - | 4334 | 12032 | |
| 380.0 | - | 4575 | 12361 | |
| 400.0 | - | 4815 | 12683 | |
| 420.0 | - | 5055 | 12996 | |
| 440.0 | - | 5295 | 13302 | |
| 460.0 | - | 5535 | 13601 | |
| 480.0 | - | 5776 | 13893 | |
| 500.0 | - | 6016 | 14180 | |
| 520.0 | - | 6256 | 14460 | |
| 550.0 | - | 6616 | 14872 | |
| Set pressure in bar (ü) | GW | 3/4 | ||
| d0 (mm) | 4.0 | |||
| A0 (mm²) | 12.56 | |||
| Medium | B | D | E | |
| 260 | 1865 | 6044 | 543 | |
| 300 | 2157 | 6941 | 624 | |
| 400 | 2847 | 9142 | 822 | |
| 500 | 3481 | 11281 | 1014 | |
| 600 | 4065 | 13360 | 1201 | |
| 700 | 4609 | 15379 | 1382 | |
| 800 | 5119 | 17342 | 1559 | |
| 900 | 5600 | 19251 | 1730 | |
| 1000 | 6058 | 21108 | 1897 | |
| 1100 | 6495 | 22917 | 2060 | |
| 1200 | 6914 | 24682 | 2218 | |
|
Pressure-Temperature Rating |
 |
